Settings (continued)
Update process
� When this unit is turned on, the Internet connection starts automatically.
●“Accessing...” blinks on the screen.
●The current version of this unit software and the latest version of the update file on the network are displayed when latest version of firmware has been found.
To update this unit software with update file, select “Yes”, and go to step 2.
Latest version of firmware has been found.
Firmware update is available.
Proceed with update?
Current Version : | xxxxxxxxxx |
Latest Version : | yyyyyyyyyy |
If “Yes” will be selected, version update will start.
Yes
No
●If the latest firmware version has been already updated, nothing is displayed on the screen.
2� Press ENTER to start updating.
Downloading latest firmware…
Version : yyyyyyyyyy
30%
3� When the software is successfully updated, a screen is displayed indicating that the update process is completed.
●If the update has failed, an error message appears.
Retry the update after checking if the broadband Internet connection (page 11) and communication settings (pages 29– 30) are performed properly.
4� Press
Manual Update from Network
This function allows you to perform the update operation by accessing an Internet connection manually to check if there is a new firmware version.
Notes:
●Make sure that the LAN cable is connected to this unit.
●Make sure to perform the communication settings. (See pages 29
●It may take time to access and download the update depending on the Internet connection and other factors.
Caution:
●Do not remove the LAN cable or unplug the AC power lead while downloading or updating software.
� Press 
/ 
to select “Settings”, then press 
or ENTER.
2� Press 
/ 
to select “Software Update Settings”, then press 
or ENTER.
3� Press 
/ 
to select “Manual Update”, then press 
or ENTER. 4� Press 
/ 
to select “Network”, then press ENTER.
5� During access to the network and checking the latest version of firmware, “Accessing” blinks.
●The current version of this unit software and the latest version of the update file on the network are displayed when latest version of firmware has been found.
To update this unit software with update file, select “Yes”, and go to step 6.
Latest version of firmware has been found.
Firmware update is available.
Proceed with update?
Current Version : | xxxxxxxxxx |
Latest Version : | yyyyyyyyyy |
If “Yes” will be selected, version update will start.
Yes
No
●If the Internet connection has failed, an error message appears.
Retry the update after checking if the broadband Internet connection (page 11) and communication settings (pages 29–
30)are performed properly. 6� Press ENTER to start updating.
Downloading latest firmware…
Version : yyyyyyyyyy
30%
7� When the software is successfully updated, a screen is displayed indicating that the update process is completed.
● If the update has failed, an error message appears.
Retry the update after checking if the broadband Internet connection (page 11) and communication settings (pages 29– 30) are performed properly.
8� Press
Manual Update from USB memory device
This function allows software updates by inserting a USB memory device with the update file into the USB1 terminal on this unit.
●When a software update is performed, the software update data must be written onto the USB memory device in advance using a PC.
●The USB memory device must be clear of all files except software update data to allow new software uploading.
To check for the availability of a software update, visit www.sharp.de
●When software update data is released, copy the data onto a USB memory device after downloading it to a PC.
●For methods such as downloading and copying to a USB memory device, carefully read the description shown on the website before performing the operation.
Notes:
●Only USB memory devices formatted with FAT 32/16 are compatible.
When formatting a USB memory device using a PC, perform the following settings.
Format File System: FAT32
Allocation Unit Size: Default Allocation Size
●Do not extract the firmware update file to any folders other than the root directory on the USB memory device. The firmware update file must be only one file directly in the root directory.
