System connections (continued)
■Demonstration mode
●The first time the unit is plugged in, the unit will enter the demonstration mode.
●To cancel the demonstration mode, press the RETURN/DEMO button (remote control) during power
●To return to the demonstration mode, press the RETURN/DEMO button again.
●If iPod or iPhone is docked, the unit will begin charging. “Charge Mode” will be displayed. Demonstration mode is invalid during charge mode.
■Connecting iPod or iPhone toTV
Photo and video files from iPod or iPhone can be viewed by connecting the system to TV/monitor.
If the TV/monitor has a video input, connect it to the iPod VIDEO OUT socket at the back of the unit and set the TV Out on the iPod or iPhone unit to “ON” position. (Refer page 36.)
Note:
Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple’s homepage for further information.
■AC power connection
After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
■HDMI connection (TV, projector)
You can enjoy high quality digital picture and sound using an HDMI cable. (Only TVs/projectors with an HDMI terminal can be connected to this unit.)
When using HDMI ARC (Audio Return Channel) Connection When this unit is connected to TV, there might be a necessity to adjust the TV menu.
Refer the operation manual of the respective TV, concerning ARC. In case of incompatibility between this unit and your TV HDMI ARC, please use the analog or digital connection. (Refer Line In and Digital In connection on page 11.)
When you use AQUOS LINK or TV ARC, make sure to use a certified HDMI cable.
� Be sure to turn off this Unit and the TV/projector before making any connections.
2� Firmly connect an HDMI cable to the HDMI OUT (TV ARC) terminal on this unit (1) and the HDMI IN terminal of the TV/projector (2).
HDMI cable (supplied)
To TV HDMI (ARC) input terminal
Projector TV
Notes:
●In this unit, “HDMI Video Out” is set to “Auto” as a default (See page 27). (Normally set to “Auto”.) If you don’t get a stable image with “HDMI Video Out” set to “Auto”, select the output resolution which corresponds to the connected equipment.
●This unit supports HDMI which enables ARC (Audio Return Channel).
●To enable ARC make sure to use High Speed HDMI cable.
●This structure also needs TV that supports ARC.
●To enjoy 3D images, connection to a 3D compatible TV is needed.
●For connection to a TV/projector, refer to the TV/projector’s operation manual.
After connecting
●If necessary, perform the Audio Video Settings. (Page 27)
●Refer to AQUOS LINK function. (Pages 16 and 28)
●Prepare the desired disc or content and start playback. (Pages
■Connecting to an amplifier/AV receiver
You can connect this unit to an amplifier/AV receiver to enjoy digital surround sound. With this unit, the audio connection can be made using HDMI connection depending on the capabilities of the amplifier/ AV receiver you connect.
Note:
●Be sure to turn off this Unit and the equipment before making any connections.
●For details on output of audio formats, see page 34.
HDMI
cable
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TV |
|
|
|
|
|
|
|
| Amplifier/ |
|
|
|
|
|
|
|
| ||
|
|
| HDMI cable | ||||||
|
|
|
|
|
|
|
|
| AV receiver |
Notes:
●When using an HDMI output, 7.1 ch Digital Output is available.
●Audio transmitted in
●When a connection to a 3DTV is made via an amplifier/AV receiver, it is necessary to connect to a 3D compatible amplifier/AV receiver.
