Sharp XL-BD601PH operation manual System connections, Speaker connection, Aerial connection

System connections

Make sure to unplug the AC power lead before making any connections.

Right	TV
speaker
	Video cable
FM aerial
	(not supplied)
	To video input socket (for iPod video connection only)
	Left
	speaker
	Red

Wall socket

(AC 220 - 240 V ~ 50/60 Hz)

HDMI cable

To HDMI input terminal

■ USB 1, USB 2 terminals and Video Out socket	Front
Rear
	USB 2
	Terminal
USB 1
Terminal

External FM aerial:

Use an external FM aerial (75 ohms coaxial cable) for better reception. When an external FM aerial is used, disconnect the supplied FM aerial wire.

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

■ Speaker connection

VIDEO OUT

socket

HDMITerminal

USB 1 terminal:

This terminal is only for USB memory devices to support music, video, photo and memory expansions for BD-LIVE.

VIDEO OUT socket:

This socket is only for iPod and iPhone video out connection.

USB 2 terminal:

This terminal is only for iPod, iPhone and iPad. It does not support USB memory device.

HDMI terminal:

This terminal supports DISC function (BD, DVD, CD and USB 1), TV ARC and AQUOS LINK.

■Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM 75 socket and position the FM aerial wire in the direction where the strongest signal can be received.

● Connect the wire without insulation tube to

the minus (–) terminal, and the wire with red

insulation tube to the plus (+) terminal.

● Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.	Incorrect

●Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.

●Do not let the bare speaker wires touch each other.

●Do not allow any objects to fall into or to be placed in the bass reflex ducts.

●Do not stand or sit on the speakers.You may be injured.

E-