D-Link DHS-3224V manual Rear Panel Connections

D-Link DHS-3224V Switch User’s Guide

Rear Panel Connections

The rear panel connections of the DHS-3224V Switch and SP-24 Splitter are illustrated in the diagram below. The necessary connections are:

1.Connect the female RJ-21 interface (labeled PSTN A or PSTN B) on the rear panel of the SP-24 DSL Splitter to the PBX (POTS line) using RJ-21 cable.

2.Connect the female RJ-21 interface (labeled LINE A or LINE B) on the rear panel of the Splitter to the Main Distribution Frame, Cabling Cabinet or other wiring system used for connection the end users. This connection is made using Telco50 cable with a male RJ-21 connector.

3.Connect the 10/100BASE-TX Uplink port to the Ethernet backbone using Category 5 or better twisted- pair cabling with RJ-45 connector.

Figure 4-3. Rear Panel Connections

Note: In Figure 4-3. Rear Panel Connections, a 24-port RJ-11 patch panel is used for the purpose of illustrating the Splitter-to-subscriber connection.

14