MAC Address Aging Time sec300, Switch | D-Link DHS-3224V guide

D-Link DHS-3224V Switch User’s Guide

Switch Settings

Figure7- 22. Switch Settings

Use the Switch Settings menu to change the following fields:

		This field specifies the length of time a learned MAC
		Address will remain in the forwarding table without
	MAC Address Aging Time (sec):[300 ] *	being accessed (that is, how long a learned MAC
	MAC Address Aging Time (sec):[300 ] *	Address is allowed to remain idle). The Aging Time
		Address is allowed to remain idle). The Aging Time
		can be set to any value between 10 and 1,000,000
		seconds.
	Switch 802.1x	This allows you to set 802.1x Port Based Network
	Switch 802.1x	Access for the whole Switch.
		Access for the whole Switch.

	VDSL Rate Adaptive	This must be enabled if you use the Rate Adaptive
	VDSL Rate Adaptive	feature when you configure port settings.
		feature when you configure port settings.

	Broadcast / Multicast Storm Mode	Select Enabled or Disabled to globally enable or
	Broadcast / Multicast Storm Mode	disable the Switch's reaction to Broadcast storms,
		triggered at the threshold set below.
		This is the number of Broadcast/Multicast packets in
	Limited Threshold for Ports	Kbps received by the switch - on one of the base ports
	Limited Threshold for Ports	- that will trigger the switch's reaction to a
		- that will trigger the switch's reaction to a
		Broadcast/Multicast storm.

*Note: A very long Aging Time can result with the out-of-date Dynamic Entries that may cause incorrect packet filtering/forwarding decisions. A very short aging time may cause entries to be aged out to soon, resulting in a high percentage of received packets whose source addresses cannot be found in the address table.

105

Image 119

D-Link DHS-3224V manual MAC Address Aging Time sec300, Switch, Vdsl Rate Adaptive, Broadcast / Multicast Storm Mode

Contents

DHS-3224V Ethernet over Vdsl 24-Port Switch Copyright Statement Wichtige SicherheitshinweiseTrademarks Table Of Contents Save Changes Configuring the Switch Switch Configuration Using the Web Management Software Technical Specifications 144 Maintenance 138 Illustrations and Examples 19. Configure Port Settings Screen Web-based Configuration 57. Save Settings to Tftp Server Screen 29. Configure Asymmetric VLANs Menu 111 66. Use Configuration File on Server window 138 Page Terminology Overview of this User’s GuideIntended Audience Page Applications Ethernet over Vdsl Hardware Switch Description and Function Management FeaturesPerformance Features Ports Unpacking Switch Placement Attaching the mounting brackets to the Switch Rack Installation Power Failure Power on Rear Panel Front Panel LED indicators LED Indicators Connections to SP-24DSL Splitter Connecting Multiple SwitchesStacking a Switch Group Connections to the Switch Cable Connections for a Stacked Switch Group Powering On Switch Stacks Uplink to Ethernet Backbone Front Panel Network Connections Front Panel Connections Rear Panel Connections Rear Panel Connections Connection to the DSL Splitter Network Connections to DSL Splitter Cable Attachments to DSL Splitter Degree Connector secured with two screws Connection to End User Install the Ground Wire on the DSL Splitter Spanning Tree Protocol VLANs Diagnostic Console Port RS-232 DCELocal Console Management IP Addresses and Snmp Community Names Boot ScreenSwitch Information Screen Cold Start Remote Management Setup MenuAuthentication Failure Traps Fan Failure MIBsNew Root Topology Change Packet Forwarding AuthenticationMAC Address Aging Time Packet Filtering Managing Switch Stacks Initial Stack Order Determining Switch Stack Order STP Operation Levels Spanning Tree Protocol Port Level STP Switch Level STPParameter Description Default Value Variable Description Default Value STP Port States Creating a Stable STP Topology Listening DisabledTransition States Blocking User-Changeable STP Parameters Default Spanning-Tree ConfigurationFeature Default Value Before Applying the STA Rules Illustration of STP VLANs Sample Network using STP 802.1Q Packet Forwarding Decisions Ieee 802.1Q VLANs Packet Forwarding in 802.1Q VLANs 802.1Q Vlan Tags Ieee 802,1Q Tag Port Vlan ID Ingress Filtering Tagging and Untagging Packets Eliminating Broadcast Storms Configuring VLANsBroadcast Storms Segmenting Broadcast Domains Multicast Addressing Asymmetric VLANs Console Usage Conventions Connecting to the Switch First Time Connecting to the Switch Connecting to the Switch Using Telnet User Accounts Management Setup User Accounts screen appears Setup User Accounts Screen Root, User+, and User Privileges Save ChangesRoot, User+ and Normal User Privileges Main menu Factory Reset Main Menu Reboot Updating or Deleting User Accounts Logging On to The Switch Console Deleting a User Account Viewing Current User Accounts Advanced Setup Configuring the SwitchBasic Setup Select either the Serial Port Settings or Slip Settings Serial Port and Slip Settings Switch Information Status Stacking ConfigurationUnit 13. System Information Menu System Information 15. Remote Management Setup Screen Configure IP Address Setting Trap Receivers Management Station IP Settings Switch Settings Configure Switch Settings Broadcast/Multicast Storm Control Configure Port Settings Configure Ports 19. Configure Port Settings Screen 20. Configure Port Security Screen Configure Port Security PAE System Configuration Configure Port Access Entity 23. Port 802.1X Capability Settings screen 25. Reauthenticate Portss menu Configure 802.1X Authenticator Configuration Link DHS-3224V Switch User’s Guide 27. Configure Radius Server menu Configure Radius Server 29. Configure Authentic Radius Server screen Vdsl Settings Configure Port Mirroring STP Parameter Settings Configure Spanning Tree Protocol Toggle the View Ports Port Spanning Tree Settings Action Configure MAC Address ForwardingMAC Address Filtering and Forwarding Configure Multicasting Configure MAC Address Filtering 38. Multicast Forwarding Settings Screen Configure Ieee 802.1Q Multicast Forwarding 39. Igmp Snooping Menu Configure Igmp Snooping 40. Vlan Menu Configure VLANs 42. Edit 802.1Q VLANs Menu 43. Vlan Menu To edit the 802.1Q Vlan membership of a port Asymmetric VLANs 45. Configure Asymmetric VLANs Menu 47. Port Priority Screen Configure Port Priority Port Utilization Port Error PacketsNetwork Monitoring Port Packet Analysis 50. Port Error Statistic Screen Browse MAC Address Switch History System Utilities Upgrade Firmware from Tftp Server 56. Use Configuration File on Tftp Server Screen Use Configuration File on Tftp Server Save History Log to Tftp Server Save Settings to Tftp Server Local Loopback Test Ping Test 61. Line Loopback Test Screen Line Loopback Test 62. System Reboot menu System Reboot Logout 63. System Reboot Confirmation Screen Getting Started Introduction Ports Log On to Web ManagerWeb Interface Components Web Manager Folders and Menus Accessing Menu Windows System Time Setup Switch Configuration IP Settings Window IP Settings Fan Status Ext. Module TypeExt. Module Version Vdsl Patch File Version Rate Adaptive SpeedVdsl Connection Ethernet Connection 10. Configure Port Settings Window Configure Slot Module Port No. of MAC Lock 13. Configure Individual Port Security Menu PAE System Control Port Authenticating Settings Initialize Portss Reauthenticate Portss 17 .1X Authenticator Settings window Configure Authenticator From To SuppTimeoutServerTimeout Unit General Radius Server Radius Server Authentic Radius Server Port Mirroring Local User Vdsl Rate Adaptive SwitchBroadcast / Multicast Storm Mode MAC Address Aging Time sec300 23. Vdsl Settings Menu Add a Static 802.1Q Vlan Configure 802.1Q Static VLANs Edit 802.1Q VLANs 26 .1Q Static VLANs Entry Settings Edit Screen Port Vlan ID 802.1Q Port SettingsPort Vlan ID Pvid Ingress Filter Port Ingress Filter Group Address Filtering Multicasting Options PortMap / State Multicast ForwardingIgmp Snooping Robustness Variable Age-out TimerIgmp Snooping State Querier State Priority Level Priority Spanning Tree Protocol Configuration Port Cost Port Spanning Tree State MAC ForwardingMAC Filtering 38. Management Station IP Address Screen Community Strings Community String Trap ReceiversUser Accounts Trap Receiving Station 42. Add User Accounts Control Table Data Bits Serial Port SettingsConsole Settings Baud Rate Remote IP Address Slip SettingsInterface Name Local IP Address Packets Monitoring Received RX 46. Rx Packets Analysis window Line Chart Packets View Line ChartUMB-cast RX Bytes Broadcast UnicastMulticast Transmitted TX 50. Tx Packets Analysis window Line Chart 52. Rx Error Analysis window Line Chart Errors Fragment CRCErrorUnderSize OverSize 54. Tx Error Analysis window Line Chart LateColl SizePacket Size ExDefer 512-1023 65-127128-255 256-511 MAC Address 59. Igmp Snooping Table window Authenticator Statistics Port Access ControlAuthenticator State Radius Authentication Authenticator Session-Counter 64. Show Radius Accounting window Radius Accounting Configuration File MaintenanceTftp Services Update Firmware Save History Log Save Settings Log Text SequenceTime 70. Ping Test window 72. Line Loopback Test Screen Save Changes 75. Restart System window Restart System Dimensions Power ConsumptionTemperature Storage Temperature Humidity Return Loss Operating TemperaturePassband Frequency Insertion Loss Runtime Switching Software Default Settings Offices Japan Link Japan