D-Link DHS-3224V manual Configure Authentic Radius Server screen

D-Link DHS-3224V Switch User’s Guide

•Accounting Mode:<Start and Stop> – Select the desired method: Start and Stop, Stop only, or None.

*The ServerTimeout value must be set to a value that is less than the Radius Timeout and Radius Maximum Retransmit settings (see Configure 802.1X – Authenticator Configuration)

Figure 6- 29. Configure Authentic Radius Server screen

This screen allows you to set the following features:

•Succession: <First> – Choose the desired RADIUS server to configure: First, Second or Third.

•Radius Server: [0.0.0.0] – Set the RADIUS server IP.

•Authentic Port:[ 0 ] – Set the RADIUS account server(s) UDP port. The default is 1812.

• Accounting Port:[ ] – Set the RADIUS account server(s) UDP port. The default is 1813.

•Key – Set the key the same as that of the RADIUS server.

•Confirm Key – Confirm the shared key is the same as that of the RADIUS server.

•Status:<Invalid> –This allows you to set the RADIUS server as Valid or Invalid.

Figure 6- 30. Configure Local Users screen

The fields on this screen allow you to add or remove local users.

64