ADC Release 3.1 user manual FT1 FRS Card Configuration Window

1152700 • Issue 1 • February 2001 • Operation and Maintenance

DLP-785

Page 3 of 7

channel of the interface desired to make it “Current” to allow configuration changes or to delete that interface.

16.Select the Close button to return to the FT1 FRS card display.

17.Select the Close button to return to the Chassis View window.

18.Repeat steps 1 through 14 for each card in the shelf.

Stop! You have completed this procedure.

Cellworx Vision: Card View - T1 Frame Relay Service X

	NE Name: Cellworx1	Status:
NE AND CARD TYPE/	NE Id: 20
	Card: FT1 FRS	Configuration:
SLOT INFORMATION.	Slot Number: 12	Card Level
	Port Number: 1
		Administrative State:		Congestion Thresholds:
	FT1	Locked		Ingress:	80	%
		Unlocked		Egress:	80	%
	FRS
		Ring Selection:
		Auto		Ring 16	Ring 17
		Smoothing Constant:			0.3
CARD REPRESENTATION		Port Level
		Administrative State:		Transmit Timing Source:
WITH ALARM
INDICATIONS.	ADC	Locked		Recieved
		Unlocked		Local
	Status	Channel Bit Rate:		Facility Data Rate:
	Active	64 Kbps		None
	APS
		56 Kbps		ANSI T1-403
	Port	Line Build Out (LBO):		0-133 feet
	1
	2	Line Coding:		B3ZS
CLICK ON ANY PORT TO	3
	4	Line Type:		Extended Superframe
CONFIGURE INDIVIDUAL	5
	6	Circuit Identifier:		default
FT1 PORTS.	7
	8	Loopback:		Far End Loopback:
		None		None
	Apply	Chassis View	Refresh			Close

CLICK ON BOX AND DRAG UP OR DOWN TO WIDEN STATUS OR CONFIGURATION VIEWS.

CARD LEVEL CONFIGURATION OPTIONS.

CLICK ON BOX AND DRAG UP OR DOWN TO WIDEN PORT LEVEL VIEW.

T1 PORT LEVEL CONFIGURATION OPTIONS. SELECT PORT FIRST.

USE SLIDERS TO VIEW

HIDDEN SELECTIONS.

APPLIES CHANGES	RETURNS TO CHASSIS	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	TO REFLECT ANY	VIEW AND RETURNS TO
CONTROLLER.	CARD LEVEL VIEW.	CHANGES.	SHELF LEVEL VIEW.
			0026-020

Figure 785-1. FT1 FRS Card Configuration Window

Page 2-359

© 2000, ADC Telecommunications, Inc.