ADC Release 3.1 user manual Controller Card Level View Changes Shelf Level View

1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance

DLP-762

Page 2 of 6

Cellworx Vision: Card View - T3 TMUX Multi 1 Mother Card							X
NE Name: Cellworx1			Status:
NE Id: 1			Card Level
Card: T3 TMUX MULTI 1 / TMUX E
Slot Number: 3 / 4			Slot: 3	Slot: 4
Port Number: 1			Operational State:			Up
Channel Number:		1
			Availability State:			Available
			Protection State:			Unknown
T3 TMUX	TMUX
MULTI 1	EXP
			Port Level
			DS3 Port		DS1 Channel
			Line State:
			Transmit:			Recieve:
			Xmit AIS			No Alarm
			Xmt RAI Alarm			Rcv AIS
						RCV RAI Failure
ADC	ADC					Rcv Test Code
Status	Status		Other:
Active	Active		LOF
Protect	Protect
			LOS
Port			Loopback State
1
			Configuration:
			Port Level
	Apply		Chassis View			Refresh	Close

CLICK ON BOX AND DRAG UP OR DOWN TO EXPAND STATUS OR CONFIGURATION VIEWS.

APPLIES CHANGES	RETURNS TO CHASSIS	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	TO REFLECT ANY	VIEW AND RETURNS TO
CONTROLLER.	CARD LEVEL VIEW.	CHANGES.	SHELF LEVEL VIEW.

13436-B

Figure 762-1. T3 TMUX Multi 1/TMUX EXP Card Status Window

Table 762-1. Display T3 TMUX Multi 1 and TMUX EXP Card Status Definitions

ITEM

STATUS

DEFINITION

ACTION

Operational State

Up

Down

Unknown

Card is functioning properly.

Card is not functioning properly, is in reset mode, or failed. Check Admin state.

The shelf controller does not currently know the operational status.

No action required.

Verify card is installed, check for failure indications, or provision card for service per DLP-754.

Wait a few seconds for operations to complete and update the screen.

(continued)

Page 2-276

© 2000, ADC Telecommunications, Inc.