
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 5 of 5
Table 723-1. Subnetwork Connection Configuration Options
SELECTION
Connection Name
Segment Endpoint
Ingress / Egress NDC
Test Type
Loopback Location ID
Insert Loopback Cells
Test Status
OPTIONS
User Defined
Single selection box
On or Off
End to End OAM Segment OAM Continuity Check Source Continuity Check Sync No Test
Towards Access Facility Towards Ring Facility
None
Active
DESCRIPTION
Displays the connection name selected for configuration. User may rename the connection by typing in a new name and hitting Apply.
Sets this end of the connection as a segment endpoint for OAM cells.
Enables or disables the network data collection for selected circuit.
No test is currently being administered.
Customer assigned location identifier, used to loopback the incoming signal and transmit it back to the customer equipment, limited to 16 numeric characters.
Test is not currently active.
Test is currently in progress.
Page
2000, ADC Telecommunications, Inc.