1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2 of 5
C. CES INTERFACE CONFIGURATION
13.Double click on one of the ports available (1 to 16). The CES interface screen appears. Refer to the example shown in Figure
14.Set the CES configuration options as needed using Table
15.Select the Apply button and then the Close button to return to the E1 card display.
16.Repeat steps 3 through 6 for each E1 Multi 1 port on the card.
17.Select the Close button to return to the Chassis View window.
18.Repeat steps 1 through 17 for each card in the shelf.
Stop! You have completed this procedure.
NE AND CARD TYPE/ SLOT INFORMATION.
CARD REPRESENTATION WITH ALARM INDICATIONS.
CLICK ON THE PORT TO CONFIGURE INDIVIDUAL E1 PORTS.
Cellworx Vision: | Card View - E1 Circuit Emulation Service |
| X | ||||
NE Name: Cellworx1 | Status: |
|
|
|
|
| |
NE Id: 1 |
|
|
|
|
|
|
|
Card: E1 MULTI 1 | Configuration: |
|
|
|
|
| |
Slot Number: 8 | Card Level |
|
|
|
|
| |
Port Number: 1 |
|
|
|
|
| ||
|
|
|
|
|
| ||
|
| Administrative State: | Congestion Thresholds: | ||||
E1 MULTI | Locked |
|
| Ingress: | 80 | % | |
Unlocked |
|
| Egress: | 80 | % | ||
1 |
|
|
| ||||
|
|
|
|
|
|
| |
|
| Ring Selection: |
|
|
|
| |
|
| Port Level |
|
|
|
|
|
|
| Administrative State: | Transmit Timing Source: | ||||
|
| Locked |
|
| Recieved |
| |
|
| Unlocked |
|
| Local |
|
|
ADC |
| Service Type: |
|
|
|
|
|
| Circuit Emulation (CES) |
|
| ||||
|
|
|
| ||||
Status | Cell relay (CRS) |
|
|
|
| ||
Active |
|
|
| 120 Ohms |
|
| |
APS | Line Build Out (LBO): |
|
| ||||
Port |
| Line Coding: | HDB3 |
|
|
| |
|
|
|
|
|
|
| |
1 | 9 | Line Type: | E1 |
|
| ||
2 | 10 |
|
|
|
|
|
|
3 | 11 | Facility Data Link (FDL): | None |
| |||
4 | 12 |
|
|
|
|
|
|
5 | 13 | Loopback Config: |
| None |
|
| |
6 | 14 |
|
|
|
|
|
|
7 | 15 | Circuit Identifier: | default |
|
| ||
8 | 16 |
|
| ||||
|
|
|
|
|
| ||
| Apply | Chassis View |
| Refresh |
| Close | |
CLICK ON BOX AND DRAG UP OR DOWN TO WIDEN STATUS OR CONFIGURATION VIEWS.
CARD LEVEL CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP OR DOWN TO WIDEN PORT LEVEL VIEW.
E1 PORT LEVEL CONFIGURATION OPTIONS. SELECT PORT FIRST.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
APPLIES CHANGES | RETURNS TO CHASSIS | REPAINTS WINDOW | CLOSES CARD LEVEL |
AND SENDS TO SHELF | VIEW WITHOUT CLOSING | TO REFLECT ANY | VIEW AND RETURNS TO |
CONTROLLER. | CARD LEVEL VIEW. | CHANGES. | SHELF LEVEL VIEW. |
|
|
|
Figure 747-1. E1 Multi 1 Card Configuration Window
Page
© 2000, ADC Telecommunications, Inc.
