ADC Release 3.1 user manual SET 2488 Ring Interface Card RIC Configuration

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance

DLP-756

Page 1 of 3

SET 2488 RING INTERFACE CARD (RIC) CONFIGURATION

Summary: This procedure details the steps required to set the 2488 Ring Interface Card configurations utilizing the Cellworx STN Phase 3.1 shelf level Graphical User Interface (GUI). User must the have GUI launched and accessed the shelf level GUI display per NTP-006 prior to performing this procedure.

1.Double click on the 2488 RIC located in slot 16 or 17 in the shelf level GUI “Chassis View”at the top of the window. The 2488 card level display apears similar to Figure 756-1.

2.Set the configuration options for the card and port using Table 756-1 as a reference for the options.

3.Select the Apply button at the bottom of the window to send the new configuration data to the shelf controller.

Note: Selecting Chassis View will return the user to the previous window without closing the 2488 RIC window. Selecting Refresh will update the current window display and all the selections last recorded by the Shelf Controller card. Selecting Close will close this window.

4.Repeat steps 1 through 4 for the second 2488 RIC card installed in the shelf.

Stop! You have completed this procedure.

Page 2-257

© 2000, ADC Telecommunications, Inc.