ADC Release 3.1 user manual Retrieve T3 CES Card Status, T3 CES Card Status Window

1152700 • Issue 1 • February 2001• Section 2 Operation and Maintenance

DLP-793

Page 1 of 3

RETRIEVE T3 CES CARD STATUS

Summary: This procedure defines the information retrieved from the shelf level GUI display for the T3 CES card status. User must have the GUI launched and accessed the shelf level GUI display per NTP-007 prior to performing this procedure.

1.Double click on the T3 CES card located in the shelf level GUI “Chassis View” at the top of the window.

2.Click the small block between the Status and Configuration sections and drag it downward to view all the status information. Refer to Table 793-1 for definitions of status information provided.

3.Select each port on the card to view the statuses.

4.Select the Close button at the bottom of the window to return to the chassis level display.

Stop! You have completed this procedure.

Cellworx Vision:	Card View - T3 Cell Emulation Service					X
NE Name: Cellworx1	Status:
NE Id: 1	Card Level
Card: T3 CES	Operational State:			Up
Slot Number: 8
	Availability State:			Availabli
Port Number: 1	Protection State:			Not Protected
T3	Port Level
CES
	DS3 Line State:
	No Alarm
	Xmit AIS
	LOS
	Loopback State
	Other Failure
ADC	Configuration:
Status
Active	Card Level
	Administrative State:			Congestion Thresholds:
Port	Locked			Ingress:	80	%
	Unlocked			Egress:	80	%
1
2	Ring Selection:
3
	Auto	Ring 16		Ring 17
	Port Level
Apply	Chassis View		Refresh			Close

CARD LEVEL STATUS. INDICATIONS.

PORT LEVEL STATUS.

INDICATIONS.

CLICK ON BOX AND DRAG UP OR DOWN TO EXPAND STATUS OR CONFIGURATION VIEWS.

APPLIES CHANGES	RETURNS TO CHASSIS	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	TO REFLECT ANY	VIEW AND RETURNS TO
CONTROLLER.	CARD LEVEL VIEW.	CHANGES.	SHELF LEVEL VIEW.

0026-008

Figure 793-1. T3 CES Card Status Window

Page 2-417

© 2000, ADC Telecommunications, Inc.