
1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance
Page 1 of 2
LOGON TO REMOTE NODE CRAFT SESSION
VIA TELNET FROM GUI
Summary: This procedure instructs the operator in the steps required to logon to an NE through the craft session from the NMIC Cellworx Vision GUI. Once logged onto the NE craft screen, the operator can provision all cards, ports, and alarms for that shelf. The provisioning information is set on the shelf controllers and backed up onto the NMIC immediately following the change. Prerequisites to this procedure requires that the operator must first have launched the GUI that controls the node targeted for craft interface session, and the node must have been discovered and is visible to the NMIC.
1.To establish a craft session to a node from the GUI, select the Direct Selection tool (arrow) on the left tool bar using the left mouse button. Next select the targeted NE and then hit the right mouse button. A
2.The targeted node responds with a logon screen prompting the operator for a user name and password. See Figure
3.The Cellworx main menu should now be displayed resembling the example shown in Figure
Stop! You have completed this procedure.
| Cellworx Vision Subnetwork Management System |
| ||
File | Configuration | Fault | Performance | Help |
|
| i |
|
|
|
|
| About... |
|
|
|
| GNE- Craft Interface... |
|
|
|
| Create Connection... |
|
|
|
| View Connection... |
|
|
|
| Configure Alarm Threshold... |
|
|
|
| Configure Software... |
|
|
|
| Reflash Boot Image |
|
|
|
|
|
|
|
|
|
| |
Cellworx User: root |
|
|
| |
Local Time: 23:30 GMT Time: 23:30 |
|
| ||
|
|
|
|
Figure 703-1. GUI Remote Craft Logon Pop-up Window
Page
© 2000, ADC Telecommunications, Inc.