ADC Release 3.1 user manual Retrieve T3 Tmux Multi 1 Card Status

1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance

DLP-762

Page 1 of 6

RETRIEVE T3 TMUX MULTI 1 CARD STATUS

Summary: This procedure defines the information retrieved from the shelf level GUI display for the T3 TMUX MULTI1 card status. User must have the GUI launched and accessed the shelf level GUI display per NTP-007 prior to performing this procedure.

1.Double click on the T3 TMUX MULTI 1 card located in the shelf level view at the top of the window.

2.Click the small block between the Status and Configuration sections and drag it downward to view all the status information. Refer to Table 762-1 for definitions of status information provided. To view status information for the T3Tmux Multi 1, click on the tab for the first slot in the group. Click on the second slot tab for the TMUX EXP card.

3.To view a status of individual DS1 channels contained in a DS3, select a Channel Number at the upper right block above the simulated card and then click on the DS1 Channel tab under the Port heading. The window should appear similar to the one shown in Figure 762- 2 displaying the DS1 port selected. Change the channel number above the simulated card as needed. Refer to Table 762-2 for DS1 port status definitions.

4 Select Close button to return to the chassis level view.

Stop! You have completed this procedure.

Page 2-275

© 2000, ADC Telecommunications, Inc.