ADC Release 3.1 user manual Cellworx Vision Add an Expansion Node Pull Down Menu

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance

DLP-712

Page 3 of 8

limited only by the number of ports in the RNE and the 50 node limit per network. Repeat this procedure for each STN-EPS shelf that needs to be added to the ring.

Stop! You have completed this procedure.

Cellworx Vision Subnetwork Management System

File

Configuration

Fault Performance

Time and Date

Connection

Topology

Software

NMIC Platform

Add Ring Network Element

Add Expansion Shelf Network Element

Remove Ring Network Element

Remove Expansion Shelf Network Element

Refresh...

Force Network Discovery ...

Revert to Saved Icon Layout...

Ring Audit

Ring Upgrade

Turn Up Ring...

10965-E

Figure 712-1. Cellworx Vision Add an Expansion Node Pull Down Menu

Cellworx Vision: Add EPS NE - Task Overview		X
1)	Enter network element identifiers
2)	Enter slot and port numbers
3)	Verify RNE interface is a SEPI
4)	Physically connect EPS to ring NE

5)Wait for EPS node to boot

6)Verify NE shelf type

7)Validating EPS card type

8)Wait for database update

9)Configure software load

10)Verifying EPS interface is a SEPI

11)Configure ATM mapping to PLCP

12) EPS Added updating topology

10891-E

Figure 712-2. Cellworx Vision Adding an STN-EPS Task Overview Window

Page 2-101

 2000, ADC Telecommunications, Inc.