1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2 of 5
10.The fourth section of the window lists generic troubles that are available for alarm retrieval. Select the desired generic troubles for the alarm report either one at a time, each followed with the >> button, or all of them by selecting the ALL>> button. For a complete listing of alarms, refer to Section 4, Troubleshooting Guidelines.
11.Once the alarm filter has been customized to retrieve the alarms desired, select the Apply button to save the changes or select Close to abort any changes and close the screen.
12.The selected alarms for the
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File Configuration
iFault Performance
Alarms |
Configure NE Alarm Threshold... |
NMIC Protection
NMIC Protection Restoration
Figure 713-1. Cellworx Vision Fault Pull Down Menu
Page
2000, ADC Telecommunications, Inc.
