
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 3 of 5
Table 755-1. T1 Multi 1 Configuration Options
SELECTION | DEFAULT |
Card and Port | Unlocked |
Administrative State |
|
|
|
Congestion | 0 |
Threshold |
|
Ring Selection | Auto |
|
|
Transmit Timing | Local |
Source |
|
|
|
Service Type | CES |
|
|
Line Build Out | |
|
|
Line Coding | B8ZS |
|
|
Line Type | Extended− |
| Superframe |
|
|
Facility Data Link | None |
|
|
Far End Loopback | Looped or |
| Normal |
| Data |
|
|
OPTIONS
Unlocked
Locked
0 to 100
Auto
Ring 16
Ring 17
Received
Local
CES
CRS
0 – 133 ft
133 – 266 ft
266 – 399ft
399 – 533ft
533 – 655
B8ZS
AMI
Extended− Superframe Superframe
ANSI-T1-403 FDL
None
None
Reset
Line
Payload
DEFINITIONS
Enables or disables card for service.
Threshold for CLP=1 cells to be discarded on the ingress/egress path.
Card will automatically select traffic from the ring direction with the best signal.
Card will receive traffic from Ring 16 direction.
Card will receive traffic from Ring 17 direction.
The Tx clock (and data rate) is the same frequency as the RX clock and data rate, (receive clock is looped to the transmitter).
The
Circuit Emulation Service.
Cell Relay Service.
Sets the signal strength according to the distance in feet that the Cellworx STN is from the T1 interfacing equipment.
Bit 8 Zero Substitution
Alternate Mark Inversion
Sets the line type to reflect customer equipment on a per port basis.
A
No loopback is requested. Values only selectable when FDL is on.
Tells far end to stop the loopback.
Tells far end to loop the line back.
Tells the far end to loop the payload after line data is extracted.
(continued)
Page
© 2000, ADC Telecommunications, Inc.