
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 1 of 2
REFLASH BOOT IMAGE
Summary: The following procedure instructs the user in how to properly “reflash” the boot image on cards after loading new feature sets. With each new release, new features and bugs are fixed in the
•Major software upgrade has been performed and there is a new bootrom
•Receives a card from manufacturing and it does not contain the correct bootrom version for the software version they are running
1.From the GUI main menu, select the NE in question using the right mouse button.
2.The NE
3.The Reflash Boot Image selection window appears displaying each card in the chassis. Refer to Figure
4.The available software reflash images will be displayed. While continuing to hold the mouse button down, drag the cursor to the desired image and release the mouse button. The selected reflash image is moved to the Selected column.
5.Repeat steps 3 and 4 for each card in the shelf.
6.Select the Apply button to initiate the card(s) reflash. This process may take several minutes per card.
7.Select the Refresh button to update the Download Status column. This Download Status column will show “Loading” until the image is loaded at which time it will display “Loaded”.
8.After the correct boot image is completely loaded, select the Cancel button to close the window.
9.Perform a card reset per
Stop! You have completed this procedure.
Page
2000, ADC Telecommunications, Inc.