ADC Release 3.1 user manual Retrieve T1 Multi 1 Card Status, T1 Multi 1 Card Status Window

1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance

DLP-764

Page 1 of 3

RETRIEVE T1 MULTI 1 CARD STATUS

Summary: This procedure defines the information retrieved from the shelf level GUI display for the T1 Multi 1 CRS card status. User must have the GUI launched and accessed the shelf level GUI display per NTP-007 prior to performing this procedure.

1.Double click on the T1 Multi 1 CRS card located in the shelf level GUI “Chassis View” at the top of the window.

2.The T1 Multi 1 CRS card display appears as shown in Figure 764-1. Click the small block between the Status and Configuration sections and drag it downward to view all the status information. Refer to Table 764-1 for definitions of status information provided.

3.Select each port on the card to view the port status.

4.Select Close button to return to the chassis level view.

Stop! You have completed this procedure.

Cellworx Vision:		Card View - T1 Cell Emulation Service		X
NE Name: Cellworx1		Status:
NE Id: 1		Card Level
Card: T1 MULTI 1		Operational State:	Up
Slot Number: 8
		Availability State:	Availabli
Port Number: 1		Protection State:	Not Protected
T1 MULTI		Port Level
1
		Line State:
		Receive:	Transmit:
		No Alarm	Xmt AIS
		RCV AIS	XMT Far End LOF
		RCV Far End LOF
		RCV Test Code
ADC		Other:
Status		LOF
		LOS
Active
APS		Loopback State
Port		Other Failure
1	9
2	10	TC Alarm Status: LCD Alarm
3	11
4	12
5	13
6	14	Configuration:
7	15
8	16
		Port Level
	Apply	Chassis View	Refresh	Close

CLICK ON BOX AND DRAG UP OR DOWN TO EXPAND STATUS OR CONFIGURATION VIEWS.

APPLIES CHANGES	RETURNS TO CHASSIS	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	TO REFLECT ANY	VIEW AND RETURNS TO	13449-B
CONTROLLER.	CARD LEVEL VIEW.	CHANGES.	SHELF LEVEL VIEW.

Figure 764-1. T1 Multi 1 Card Status Window

Page 2-284

© 2000, ADC Telecommunications, Inc.