ADC Release 3.1 user manual Eps, Locked Unlocked

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance

DLP-753

Page 2 of 4

Cellworx Vision: Card View - T3 Cell Relay Service X

											CLICK ON BOX AND DRAG
			Status:								UP OR DOWN TO WIDEN
	NE Name: Cellworx1										STATUS OR CONFIGURATION
	NE Id: 1
NE AND CARD TYPE/											VIEWS.
	Card: T3 CRS		Configuration:
SLOT INFORMATION.	Slot Number: 9			Card Level
	Port Number: 1
				Administrative State:			Congestion Thresholds:
				Locked			Ingress:	80		%
		T3
		CRS		Unlocked			Egress:	80		%	CARD LEVEL
				Ring Selection:							CONFIGURATION OPTIONS.
				Auto	Ring 16 Ring 17
				Expansion Shelf Interface
				Timing Port:
CARD REPRESENTATION				None	Port 1		Port 2		Port 3
WITH REAL TIME ALARM											CLICK ON BOX AND DRAG UP
INDICATIONS.											OR DOWN TO WIDEN PORT
				Port Level
		ADC		Administrative State:			ATM Mapping Type				LEVEL VIEW.
				Locked			PLCP
		Status		Unlocked			Direct
		Active
		Protect		Circuit Identifier:		default
		Timing		Line Type:			Transmit Timing Source:				T3 CRS PORT LEVEL
		Port		M23			Recieved				CONFIGURATION OPTIONS.
CLICK ON THE PORT TO		1		C-bit Parity			Local
CONFIGURE INDIVIDUAL		2
		3		Line Coding: B3ZS
DS1 PORTS.				Line Build Out (LBO):
				0-150 feet			150-450 feet				USE SLIDERS TO VIEW
				Loopback Config:
											HIDDEN SELECTIONS.

Apply Chassis View Refresh Close

APPLIES CHANGES	RETURNS TO CHASSIS	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	TO REFLECT ANY	VIEW AND RETURNS TO
CONTROLLER.	CARD LEVEL VIEW.	CHANGES.	SHELF LEVEL VIEW.	13450-C

SELECTION

Figure 753-1. T3 CRS Configuration Screen

Table 753-1. T3 CRS Configuration Options

DEFAULT OPTIONS DEFINITIONS

Slot #

Admin State (Card or Port)

Congestion

Threshold

Ring Selection

Expansion Shelf Interface

2	2 to 15 for Ring NE
	2 to 15 for STN-
	EPS
LOCKED	LOCKED/
	UNLOCKED
0	0 to 100
Auto	Auto
	Ring 16
	Ring 17
Not Selected	Selected
	Not Selected

Physical slot locations of the T3 cards in the shelf.

Locked = Out of service.

Unlocked = In service.

Threshold for CLP=1 cells to be discarded on the ingress/egress path.

Card will automatically select traffic from the ring direction with the best signal.

Card will receive traffic from Ring 16 direction.

Card will receive traffic from Ring 17 direction.

Determines if the card is being used as an expansion shelf interface (SEPIC) in an EPS or RNE. Click on the box to select it.

(continued)

Page 2-242

© 2000, ADC Telecommunications, Inc.