1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 1 of 1
REFRESH TOPOLOGY
Summary: This procedure describes the steps required to refresh the display of the network nodes. This is done after any changes to the view of the network have been modified such as adding or deleting nodes, moving the positions of a node, changing connections between the nodes, or changing node names.
1.Select the Configuration pull down menu, Topology, and Refresh using the left mouse button or by hitting Alt+C, Alt+T, and Alt+R. Refer to Figure
2.The system responds with a message window stating that it is updating the topology, and to please wait. Refer to Figure
3.A refresh may also be initiated using the icon shown in Figure
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File
Configuration
Fault Performance
Time and Date
Connection
Topology
Software
NMIC Platform
Add Ring Network Element
Add Expansion Shelf Network Element
Remove Ring Network Element
Remove Expansion Shelf Network Element
Refresh...
Force Network Discovery ...
Revert to Saved Icon Layout...
Ring Audit
Ring Upgrade
Turn Up Ring...
Figure 718-1. Cellworx Vis on Configuration Pull Down Menu
Updating topology. Please wait...
Figure 718-2. CellworxiVision GUI Updating Topology
REFRESH
TOPOLOGY 
Figure 718-3. Refresh Topology Icon on NMIC GUI
Page
2000, ADC Telecommunications, Inc.
