1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2 of 4
10.Repeat steps 1 through 9 for each 622 SM CRS card installed in the shelf.
Stop! You have completed this procedure.
Figure 797-1. 622 SM CRS Card Shelf Level GUI Configuration Screen
Table 797-1. 622 SM CRS Card Configuration Options
SELECTION
DEFAULT
OPTIONS
DEFINITIONS
| Admin State |
| Unlock |
| Congestion Threshold | 80 | |
|
|
|
|
| Ring Selection |
| Auto |
|
|
|
|
Timing Port Selection | 1 |
|
|
Shelf Expansion | Selected |
Interface |
|
|
|
Page
© 2000, ADC Telecommunications, Inc.
Lock / Unlock
Auto
Ring 16
Ring 17
1 or 2
Selected
Not selected
Enable or disable card / port for service.
Percentage of ingress buffer capacity that will cause a congestion threshold notification.
Card will automatically select traffic from the ring direction with the best signal.
Card will receive traffic from Ring 16 direction. Card will receive traffic from Ring 17 direction.
Selects the port to use as a reference when this slot is selected as the shelf timing source.
Determines if the 622 SM CRS card is being used as an expansion shelf interface (SEPIC) in an EPS or RNE. Click on the box to select it.
(continued)
