![](/images/new-backgrounds/1206162/206162677x1.webp)
1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance
Page 1 of 1
ALARM CUT-OFF (ACO)
Summary: This procedure instructs the operator in the steps required to perform an alarm cut- off on a node in the Cellworx node. An alarm cut off disables the shelf audible alarm for any currently active alarm conditions. Any alarm conditions that are activated subsequently will reenact the audible alarm until the alarm conditions are cleared, or the operator reinitiates the ACO condition. An ACO will not extinguish any visual or message indications; visible indications shall be changed from unacknowledged (i.e., flashing) to acknowledged (constant).
The user must have gained access to the Cellworx Graphical User Interface (GUI) before performing this procedure.
1.From the GUI main screen, select the node that will have the ACO activated on it by double clicking on it using the left mouse button. The shelf level GUI “Chassis View” window appears similar to the one shown in Figure
2.Select the Fault
3.Select the Execute Alarm
Alt+C.
4.The system responds with a confirmation message as shown in Figure
Stop! You have completed this procedure.
SELECT THE FAULT PULLDOWN MENU USING LEFT MOUSE BUTTON OR BY PRESSING THE ALT+A KEYS SIMULTANEOUSLY.
| Cellworx Vision: Chassis View, Network Element 2 |
|
| X |
|
|
|
|
|
|
|
File | Configuration | Fault |
| Security |
|
|
|
|
|
|
|
|
| Configure Housekeeping Alarms |
|
|
| ||||||
S | N | Execute Alarm |
|
| 6 | 6 | S | ||||
T | T | T | T | T E E | |||||||
C | M | 3 M | 1 | 3 | 3 | 1 1 | 2 | 2 | C | ||
| I | T | U | M |
|
|
|
| 2 | 2 |
|
| C | M | X | u | C | C | M | M |
|
|
|
|
| U |
| l | R | R | u | u | R | R |
|
|
| X | E | t | S | S | l | l | i | i |
|
|
|
| X | i |
|
| t | t | n | n |
|
Figure776-1. Shelf Level Alarm Cut-Off Window
Alarm
? Are you sure you want to execute an
Alarm
OK
Cancel
Figure 776-2. Alarm Cut-Off Confirmation Window
Page
© 2000, ADC Telecommunications, Inc.