1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 6 of 6
Example: If a three node ring with one expansion shelf is used with NE.1, NE.2 and NE.3 and NE.4, then the following command would need to be entered on the NMIC:
•rm /cellworx/config/NE.?
53.For each NMIC, delete the NMIC configuration file using the following command:
•rm /cellworx/config/NMIC
54.Perform a “shutdown
55.Reboot all the nodes in the system, rebooting the node containing the NMICs last. Rebooting requires extracting and reinserting all cards in the shelf. The Shelf Controller and the NMIC can alternatively be rebooted without extraction by simultaneously pressing the enable and reset buttons under the front panel of the card.
56.At this point follow the complete ring
Stop! You have completed this procedure.
Page
© 2000, ADC Telecommunications, Inc.
