1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2 of 4
10. Repeat steps 1 through 9 for each 155 SM/MM CRS card installed in the shelf.
Stop! You have completed this procedure.
| Cellworx Vision: Card View - 155 Cell Relay Service Single Mode |
|
| X |
|
|
|
|
|
NE AND CARD TYPE/ SLOT INFORMATION.
CARD REPRESENTATION WITH REAL TIME ALARM INDICATIONS.
NE Name: Cellworx1
NE Id: 1
Card: 155 SM CRS
Slot Number: 9
Port Number: 1
155SM
CRS
ADC
Status
Active
ProtectAPS
Timing
Port
1 
2
Status:
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked |
| Ingress: | 80 | % |
Unlocked |
| Egress: | 80 | % |
Auto | Ring 16 | Ring 17 | ||
Timing Port: |
|
|
|
|
Port 1 |
| Expansion Shelf Interface | ||
Port 2 |
|
|
|
|
Port Level |
|
|
|
|
Administrative State: | Transmit Timing Source: | |||
Locked |
| System |
|
|
Unlocked |
| Recieved |
| |
Do not use for synchronization |
|
| ||
Enable Signal Degrade |
|
| ||
Signal Degrade BER Threshold: 10E- | 5 |
| ||
Medium Type:
SONET 
SDH
Loopback towards:
None 
Terminal 
Facility
CLICK ON BOX AND DRAG UP OR DOWN TO WIDEN STATUS OR CONFIGURATION VIEWS.
CARD LEVEL CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP OR DOWN TO WIDEN PORT LEVEL VIEW.
155 MBPS PORT LEVEL CONFIGURATION OPTIONS.
USE SLIDERS TO VIEW HIDDEN SELECTIONS.
Apply | Chassis View | Diagnostics | Refresh | Close |
APPLIES CHANGES | RETURNS TO CHASSIS | PERFORMS TEST | REPAINTS WINDOW | CLOSES CARD LEVEL |
|
AND SENDS TO SHELF | VIEW WITHOUT CLOSING | OVER FIBER | TO REFLECT ANY | VIEW AND RETURNS TO |
|
CONTROLLER. | CARD LEVEL VIEW. | LINK. | CHANGES. | SHELF LEVEL VIEW. |
Figure 752-1. 155 SM CRS Card Shelf Level GUI Configuration Screen
Table 752-1. 155 SM/MM CRS Card Configuration Options
SELECTION
DEFAULT
OPTIONS
DEFINITIONS
| Admin State |
| Unlock |
| Congestion Threshold | 80 | |
|
|
|
|
| Ring Selection |
| Auto |
|
|
|
|
Timing Port Selection | 1 |
|
|
Shelf Expansion | Selected |
Interface |
|
|
|
Lock / Unlock
Auto
Ring 16
Ring 17
1 or 2
Selected
Not selected
Enable or disable card / port for service.
Percentage of ingress buffer capacity that will cause a congestion threshold notification.
Card will automatically select traffic from the ring direction with the best signal.
Card will receive traffic from Ring 16 direction. Card will receive traffic from Ring 17 direction.
Selects the port to use as a reference when this slot is selected as the shelf timing source.
Determines if the 155 SM/MM CRS card is being used as an expansion shelf interface (SEPIC) in an EPS or RNE. Click on the box to select it.
(continued)
Page
© 2000, ADC Telecommunications, Inc.
