1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance
Page 5 of 10
bin - sets the binary file transfer mode
hash - optional; provides visual feedback that files are transferring.
prompt - optional; avoids having user input “y”to transfer each file.
21.Change the directory to the CD ROM drive or where the release 3.0 software is located. Replace the “r” in the following command with the proper CD drive designator.
lcd r:\versionUpgrade (This command is for PC systems only. For UNIX system commands, see the system administrator for mounting a CD ROM on UNIX.)
cd /tmp/p3 - changes the directory on the NMIC
mput * - transfers files from the workstation CD drive to the slot_4 NMIC
bye - exits the ftp session
INSTALL NEW SOFTWARE ONTO NMIC
Note: The following upgrade steps will not take affect until the upgrade script is run on each NMIC. These steps only copy the images into place.
22.From the slot_2 NMIC shell, upgrade the kernel by entering the following command:
/sbin/.cw/cw_upgradekernel /tmp/p3/xImage.3.0.0.7
23.From the slot_4 NMIC shell, upgrade the kernel by entering the following command:
/sbin/.cw/cw_upgradekernel /tmp/p3/xImage.3.0.0.7
24.From the slot_2 NMIC shell, upgrade the new operating system (OS) by entering the following command:
Note: Wait for the second prompt “Done” to appear before continuing.
25.From the slot_4 NMIC shell, upgrade the new operating system (OS) on the slot_4 NMIC by entering the following command:
Note: Wait for the second prompt “Done” to appear before continuing.
Page
© 2000, ADC Telecommunications, Inc.
