ADC Release 3.1 user manual Cellworx Vision Nmic Platform Menu Tree

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance

DLP-722

Page 2 of 3

c)The ‘config’ directory should be handled with discretion. All files under this directory distinguish active vs. standby NMICs except for the database files. Under steady state operating conditions, the database files on both NMICs will be identical. These files should not be modified when the NMICs are operationally “UP”.

The database files under config directory are; NE.*, and NMIC. The * indicates the NE number or identifier. These files are normally handled by the application automatically.

4.Once all files have been selected, select the OK button at the bottom of the window. Selected files are then copied onto the standby NMIC card.

5.The informational message shown in Figure 722-3appears stating the action being taken. Select OK.

Stop! You have completed this procedure.

Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Time and Date
Connection
Topology
Software
NMIC Platform	Administration
	File Replication
	10970-D

Figure 722-1. Cellworx Vision NMIC Platform Menu Tree

Page 2-131

 2000, ADC Telecommunications, Inc.