ADC Release 3.1 user manual Unmodified Snmp Trap Host File

1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance

DLP-775

Page 2 of 3

9.The file: /cellworx/config/config.snmp.active is READ-ONLY, so save the file in vi by entering the command string :w!

10. The vi will display a confirmation message that the file has been written. Exit vi by entering the command string :q!

11. Repeat this procedure starting at step 1 replacing /cellworx/config/config.snmp.active with the directory string /cellworx/config/config.snmp.local.

12.Once completed, perform this procedure on the stand-by NMIC also.

Stop! You have completed this procedure.

#WARNING ::::

#Default agent configuration file. Please DON'T modify if you don't know

#what you are doing because it can have adversed affect on the NMIC software.

#WARNING ::::

#!!! START USER CONFIGURABLE PARAMETERS.

#

#The following lines are the only one that may be configurable by the user.

#Each "MANAGER" clause define one destination. The syntax is as follows :

# MANAGER <host IP address>

#SEND ALL TRAPS TO PORT <trap port on destination>

#Define the forwarding of the traps to the Cellworx GUI

MANAGER localhost

SEND ALL TRAPS TO PORT 10162

#!!! END USER CONFIGURABLE PARAMETERS.

#WARNING :::

Figure 775-1. Unmodified SNMP Trap Host File

Page 2-317

© 2000, ADC Telecommunications, Inc.