ADC Release 3.1 user manual Ndc, Cellworx Vision Subnetwork Connection Configuration

1152700 • Issue 1 • February 2001 • Section 2 Operations and Maintenance

DLP-710

Page 6 of 6

Cellworx Vision Subnetwork Connection Configuration						X
Connection Name :				Administrative State:
		****************
					Locked
Connection Type : ATM VP - ATM VP					Unlocked
Network Element: NE-1
UNI/NNI: Slot13_Port1 OC3MM
VPI: 1
	Segment Endpoint
	Ingress NDC
	Egress NDC		No Test
Test Type:
Loopback Location ID:			1111111111111111
Insert Loopback Cells:			Towards Acess Facility
Test Status: None
	Test Status		Abort test
Network Element: NE-2
UNI/NNI: Slot2_Port1 OC3MM
VPI: 4
	Segment Endpoint
	Ingress NDC
	Egress NDC
Test Type:			No Test
Loopback Location ID:			1111111111111111
Insert Loopback Cells:			Towards Acess Facility
Test Status: None
	Test Status		Abort test

Apply

Close

10995-B

Figure 710-6. Cellworx Vision Subnetwork Connection Configuration Window

Table 710-2. Sub-network Connection Configuration Options

SELECTION

OPTIONS

DESCRIPTION

Segment Endpoint

Ingress / Egress

NDC

Test Type

Loopback Location

ID

Insert Loopback Cells

Test Status

Single selection box

On or Off

End to End OAM Segment OAM Continuity Check Source Continuity Check Sync No Test

Customer assigned

Towards Access Facility Towards Ring Facility

None

Active

Sets this end of the connection as a segment endpoint for OAM cells.

Enables or disables the network data collection for selected circuit.

No test is currently being administered.

Used to loopback the incoming signal and transmit it back to the customer equipment. The code is limited to 16 numeric characters.

Defines the direction for the cells to be transmitted.

Test is not currently active.

Test is currently in progress.

Page 2-97

© 2000, ADC Telecommunications, Inc.