ADC Release 3.1 user manual Retrieve 155 CRS Status, CRS Card Status Window

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance

DLP-760

Page 1 of 3

RETRIEVE 155 CRS STATUS

Summary: This procedure defines the information retrieved from the shelf level GUI card status display for the 155 CRS card. User must have the GUI launched and accessed the shelf level GUI display per NTP-007 prior to performing this procedure.

1.Double click on the 155 CRS card located in the shelf level GUI “Chassis View” at the top of the window.

2.Click the small block between the Status and Configuration sections and drag it downwards to view all the status information. Refer to Table 760-1 for definitions of status information provided.

3.Select the Close button to close the screen and return to the shelf view.

Stop! You have completed this procedure.

Cellworx Vision:	Card View - OC3c Cell Relay Service Single Mode		X
NE Name: Cellworx1	Status:
NE Id: 1	Card Level
Card: 155 SM CRS	Operational State:	Up
Slot Number: 9
	Availability State:	Available
Port Number: 1	Protection Status:	Not Protected
155 SM	Port Level
CRS
	Section Status:	Line Status:	Path Status:
	No Alarm	No Alarm	No Alarm
	LOS	AIS	STS LOP
	LOF	RDI	STS AIS
	XMT RAI Failure		STS RDI
			Unequipped
	RCV AIS
			Signal Label
ADC	XMT AIS		Mismatch
Status	Synachronization Status: BAD
Active	TC Alarm Status:	No Alarm
APS
Timing	Receive Path Trace:		CLICK ON BOX AND DRAG
Port
			UP OR DOWN TO EXPAND
1
2			STATUS OR CONFIGURATION
			VIEWS.
	Configuration:
	Port Level

Apply Chassis View Diagnostics Refresh Close

APPLIES CHANGES	RETURNS TO CHASSIS	PERFORMS TEST	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	OVER FIBER	TO REFLECT ANY	VIEW AND RETURNS TO
CONTROLLER.	CARD LEVEL VIEW.	LINK.	CHANGES.	SHELF LEVEL VIEW.	13442-B

Figure 760-1. 155 CRS Card Status Window

Page 2-269

© 2000, ADC Telecommunications, Inc.