![](/images/new-backgrounds/1206162/206162543x1.webp)
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 1 of 5
SET T1 MULTI 1 CARD CONFIGURATION
Summary: This procedure details the steps required to set the T1 Multi 1 card configurations utilizing the Cellworx STN Phase 3.1 shelf level Graphical User Interface (GUI). User must have the GUI launched, and have accessed the shelf level GUI display per
1.Double click on the T1 Multi 1 card displayed in the shelf level GUI “Chassis View”at the top of the window. The T1 or E1 Multi 1 card display appears as shown in Figure
2.Click and drag the small block upward to expand the Configuration section of the window so all or most options are visible. The Administrative State of the card and port should be “Unlocked” if in service. If “Locked”, select the “Unlocked” option using the left mouse button to enable the card and/or port for service.
3.Select a Port on the simulated card using the left mouse button.
4.Set the Port Level configuration options per requirements. Refer to Table
5.Hit the Apply button at the bottom of the window to back up the new configuration data to the shelf controller.
Note: Selecting Chassis View will return the user to the previous window without closing the T1 Multi 1 window. Selecting Refresh will update the current window display with all the selections last recorded by the Shelf Controller card. Selecting Close will close this window.
6.If configuring the port for Cell Relay Service, continue with step 7. If configuring the port for Circuit Emulation Service, go to step 13.
B. ATM INTERFACE CONFIGURATION (CRS MODE)
7.Double click on one of the ports available (1 to 16). The ATM interface screen appears. Refer to the example shown in Figure
8.Set the ATM configuration options as needed. Table
9.Select the Close button to return to the T1 card display.
10.Repeat steps 3 through 6 for each T1 Multi 1 port on the card.
11.Select the Close button to return to the Chassis View window.
12.Repeat steps 1 through 11 for each card in the shelf.
Page
© 2000, ADC Telecommunications, Inc.