1152700 Issue 1 February 2001 Section 2 Operation and Maintenance

DLP-731

Page 3 of 9

14.The system responds with an informational message similar to Figure 731-11, asking the user to confirm that the slot 17 ring system works properly. The user may select the Suspend button while rectifying any system problems or select the Next >> button to continue with the upgrade. When the user selects the Suspend button, a confirmation window appears as shown in Figure 731-14. Select Halt to stop the upgrade momentarily, Revert to fallback to the previous ring type (155c or 622c), or Continue to return to the last step completed and finish the ring upgrade. If reverting back to the previous ring type, the system software will guide the user through each step in reverse to minimize traffic loss. If continuing, select the Next>> button and go to the next step.

15.The final warning message comes up informing the user that upon completion of the next step, the user cannot perform a fallback procedure. Refer to Figure 731-15 and left click on the Complete button.

18.The system finishes it software configuration and a ring upgrade completion message appears as shown in Figure 731-16. Select the OK button.

19.By double clicking on any node from the GUI main screen, the chassis level view will appear and display the 2488 cards in slots 16 and 17. They should be green, indicating there is no problem. Refer to the TAP section of this document for any alarm conditions that may appear.

Stop! You have completed this procedure.

Cellworx Vision Subnetwork Management System

File Configuration Fault Performance Accounting Security

Time and Date

Connection

Topology

Software

NMIC Platform

Add Ring Network Element

Add Expansion Shelf Network Element

Remove Ring Network Element

Remove Expansion Shelf Network Element

Refresh...

Force Network Discovery ...

Revert to Saved Icon Layout...

Ring Audit...

Ring Upgrade...

Turn Up Ring...

0026-029

Figure 731-1. Ring Upgrade Pull-Down Menu

Page 2-165

2000, ADC Telecommunications, Inc.

Page 185
Image 185
ADC Release 3.1 user manual Ring Upgrade Pull-Down Menu