ADC Release 3.1 Delete a Cellworx STN Node, Delete a Ring Node from AN IN-SERVICE Ring System

ADCP-70-220 • Issue 1 • November 2000 • Section 2 Operation and Maintenance

NTP-010

Page 1 of 1

DELETE A CELLWORX STN NODE

Summary: This procedure outlines the steps involved to remove a Cellworx STN ring node from an in-service ring network, or an expansion shelf from an in-service condition. This procedure enables the network administer to change the network configuration when required. It may be necessary to remove a ring NE via software if the network is being uninstalled, or the equipment at a site is being moved to a new location, etc. Before removing a node from the network, all VP/VC connections to that node must be deleted.

DELETE A RING NODE FROM AN IN-SERVICE RING SYSTEM

1. Launch the Cellworx Vision Graphical User Interface (GUI). DLP-705

2.Delete any VP/VC connections that are terminated at the node

being removed from service. DLP-739

3.Delete the node via the GUI using one of the following procedures according to the type of node being removed:

• Delete a Cellworx STN node.	DLP-740
• Delete a Cellworx STN EPS shelf.	DLP-746

Stop! You have completed this procedure.

Page 2-25

© 2000, ADC Telecommunications, Inc.