ADC Release 3.1 user manual T3 CES PM Selection Criteria Window

1152700 • Issue 1 • February 2001• Section 2 Operation and Maintenance

DLP-794

Page 2 of 3

9.To configure the thresholds, place the cursor in the individual count boxes and type in the new threshold value. Refer to Table 794-1 for valid values. Once all counts are entered in each box, select the Apply button at the bottom of the screen to send the new data to the database.

10.Select the Close button to dismiss the open windows.

Stop! You have completed this procedure.

Cellworx Vision: Performance Monitoring Selection Criteria X

Resource:

NE 1: Cellworx1

NE 2: Cellworx2

NE 3: Cellworx3

NE 4: CellworxEXP

Slot / Card Type

Slot 4 / T1 MULTI 1 Slot 5 / RADSL-A CRS Slot 6 / T3 TMUX MULTI Slot 7 / T3 CRS

Slot 10 / T3 CES

Slot 12 / 155 MM CRS Slot 16 / 622 Ring Slot 17 / 622 Ring

Port

Slot 10 / Port 1

Slot 10 / Port 2

Slot 10 / Port 3

Layer

AAL-1

Interval

current 00:00 - 00:15 00:15 - 00:30 00:30 - 00:45 00:45 - 01:00 01:00 - 01:15 01:15 - 01:30 01:30 - 01:45 01:45 - 02:00 02:00 - 02:15

Apply

Save

Close

0026-006

Figure 794-1.T3 CES PM Selection Criteria Window

	DISPLAYS
	SELECTED		SUSPECTED
DISPLAYS CARD	SLOT AND	INTERVAL	RESET	REMAINING COLUMNS DISPLAY ERROR COUNTS FOR
TYPE SELECTED.	PORT.	SELECTED.	COUNTS	EACH ERROR TYPE.

Cellworx Vision: Performance Monitoring Data NE 2									X
AAL-1
Card Type	Slot-Port	Interval	Suspect	SEs	LCs	BUs	BOs	SCIs	DCs
T3 CES	8-1	current	0	0	0	0	0	0	0
Refresh		Refresh All	Reset Selected		Claear Selected		Configure Thresholds		Close
REFRESHES	REFRESHES		RESETS COUNT		RESETS COUNT		BRINGS UP		CLOSES WINDOW.
SELECTED	EVERY LINE		OF SELECTED		OF ALL LINE		CONFIGURATION
LINE.	ITEM.		LINE ITEMS.		ITEMS.		WINDOW FOR		0026-022
							CARD.

Figure 794-2. Performance Monitoring Data T3 CES Port Window

Page 2-421

© 2000, ADC Telecommunications, Inc.