ADC Release 3.1 user manual Retrieve 622 Ring Interface Card RIC Status, RIC Status Window

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance

DLP-759

Page 1 of 3

RETRIEVE 622 RING INTERFACE CARD (RIC) STATUS

Summary: This procedure defines the information retrieved from the shelf level GUI card status display for the 622 RIC card. User must have the GUI launched and accessed the shelf level GUI display per NTP-007 prior to performing this procedure.

1.Double click on the 622 RIC located in slot 16 or 17 in the shelf level GUI “Chassis View”at the top of the window.

2.Click the small block between the Status and Configuration sections and drag it downwards to view all the status information. Refer to Table 759-1 for definitions of status information provided.

3.Select the Close button to return to the shelf view.

Stop! You have completed this procedure.

Cellworx Vision:	Card View - 622 Ring Interface Card				X
NE Name: Cellworx1	Status:
NE Id: 1	Card Level
Card: 622 Ring	Operational State:	Up
Slot Number: 17
	Availability State:	Available
Port Number: 1
622	Port Level
Ring
	Section Status:	Line Status:		Path Status:
	No Alarm	No Alarm		No Alarm
	LOS	AIS		STS LOP
	LOF	RDI		STS AIS
				STS RDI
				Unequipped
				Signal Label
ADC				Mismatch
Status	Synachronization Status:		ST3
Active	TC Alarm Status:		No Alarm
Timing	Recieve Path Trace:		NE3_Slot16_Port1 (OC12)		CLICK ON BOX AND DRAG
Port
					UP OR DOWN TO EXPAND
1
					STATUS OR CONFIGURATION
					VIEWS.
	Configuration:
	Port Level

Apply Chassis View Diagnostics Refresh Close

APPLIES CHANGES	RETURNS TO CHASSIS	PERFORMS TEST	REPAINTS WINDOW	CLOSES CARD LEVEL
AND SENDS TO SHELF	VIEW WITHOUT CLOSING	OVER FIBER	TO REFLECT ANY	VIEW AND RETURNS TO
CONTROLLER.	CARD LEVEL VIEW.	LINK.	CHANGES.	SHELF LEVEL VIEW.	13444-B

Figure 759-1. 622 RIC Status Window

Page 2-266

© 2000, ADC Telecommunications, Inc.