1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 1 of 2
FORCE NETWORK DISCOVERY
Summary: This procedure describes the steps required to perform a forced network discovery. The forced discovery function compares the NMIC database with the physical topology to ensure the physical equipment on the ring matches what the NMIC thinks is there.
1.Select the Configuration pull down menu, Topology, and Force Network Discovery from the task bar by single clicking on it with the left mouse button or by hitting Alt+C, Alt+T, and Alt+F. Refer to Figure
2.The system responds with a message window stating that the GUI is forcing rediscovery on the network and to please wait as shown in Figure
3.If the system fails to force network discovery, and error message will appear as shown in Figure
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File
Configuration
Fault Performance
Time and Date |
Connection |
Topology |
Software |
NMIC Platform |
Add Ring Network Element
Add Expansion Shelf Network Element
Remove Ring Network Element
Remove Expansion Shelf Network Element
Refresh...
Force Network Discovery ...
Revert to Saved Icon Layout...
Ring Audit
Ring Upgrade
Turn Up Ring...
Figure 719-1. Cellworx Vision Configuration Pull Down Menu
Forcing rediscovery on the network. Please wait...
Figure 719-2. Cellworx Vision Rediscovery Message
Page
2000, ADC Telecommunications, Inc.