1152700Issue 1 February 2001 Section 2 Operations and Maintenance

TAP-100

Page 12 of 23

Table 4-1. Alarm Identifications, continued

ALARM

 

SEVERITY

MESSAGE

 

 

 

 

Module

 

Critical

Failure

 

 

without

 

 

protection

 

 

ModuleFail

 

 

 

 

 

Module

 

Major

Failure

 

 

Stand-by

 

 

Ring

 

 

Interface

 

 

Card

 

 

(RIC)

 

 

ModuleFail

 

 

IMPACT

Service

Outage / RICs have outage only on dual failure.

Not Service affecting. RICs have outage only on dual failure.

DESCRIPTION

Card failure or card malfunction.

Card failure or card malfunction.

SUGGESTED COURSE OF ACTION

Reset the card via software, reseat the card to reboot it. If it does not return to service, replace the card. Call ADC for warranty information and return authorization.

Reset the card via software, reseat the card to reboot it. If it does not return to service, replace the card. Call ADC for warranty information and return authorization.

Module

Minor

Failure

 

with

 

protection

 

ModuleFail

 

 

 

Not service affecting.

Card failure or card malfunction.

Reset the card via software, reseat the card to reboot it. If it does not return to service, replace the card. Call ADC for warranty information and return authorization.

NE Power Failure (A)

Power“X”Fa ilure (X = A or B)

New

SONET

Path Trace

NewPathTr ace

Critical –

Service

currently an

Outage

information

 

al alert.

 

 

 

Information

Not Service

al Alert

Affecting

 

 

An input power failure on either the A side, or B side of the shelf.

New SONET path trace has been received.

Check power supplies, breakers, and fuses. Investigate if anything in the equipment caused a breaker trip or blown fuse. Verify peroper ratings for current draw.

Informs the user that a new path trace has been established in the network, probably a new connection. No action necessary.

Optical

Laser

Failure

LaserFail

Critical/

Service

Major on

Outage

except on

RIC

RIC cards.

 

 

 

Optical LASER failure at card/port reported in alarm message.

May try resetting or reseating card but generally a hard failure. Replace card. See Section 6 of this manual for warranty and return authorization information.

(continued)

Page 2-431

© 2000, ADC Telecommunications, Inc.

Page 475
Image 475
ADC Release 3.1 user manual Module Minor Failure With Protection ModuleFail, NE Power Failure a, New, Path Trace