ADC Release 3.1 user manual GUI Screen Icon Definitions

ADCP-70-220 •	Issue 1 •	September 2000 •	Section 1 Introduction
Cellworx Vision: Subnetwork Management System
File Configuration iFault Performance			Help
GNE-1
NE-2
NE-3
Cellworx User: root
Local Time: 21:35 GMT Time: 21:35
			10924-D

Figure 1-4. Network Manager Main Screen

Table 1-1. GUI Cellworx STN Node Icon Color Codes

COLOR

INDICATION

Green

Yellow

Orange

Red

Blue

No existing alarms, normal operation.

Minor alarms exist at this site.

Major alarms exist at this site.

Critical alarms exist at this site.

Cannot communicate with the site.

GUI Screen Icon Definitions

Larger icons are used to represent the Cellworx STN shelves that have Secondary nodes (expansion shelves called STN-EPS) connected to them. These icons are referred to as Primary nodes and will look the same whether there are 2 or 10 STN- EPS nodes connected to them. Refer to Figure 1-5. The Secondary nodes may be collocated or reside at remote sites. When a user selects a node, it is highlighted by a white square that surrounds it. By double clicking on one of these nodes with the left mouse button, a new window is displayed reflecting the interconnecting relationship between the Primary and Secondary nodes. It is at this point that the user can determine the number of nodes involved. Refer to Figure 1-6. The Primary node now appears as a normal size ICON and the ring network interconnections are not displayed. To return to the ring network view, the operator clicks on the Cancel button at the bottom of the window.

Page 1-5

© 2000, ADC Telecommunications, Inc.