7UPGRADE PROCEDURES
Introduction This section describes the procedures for upgrading the wireless client from the
AirConnect version 1.0 or 1.5 product to version 2.0.
Four upgrade procedures are given, one procedure for each of four categories of
operating system:
■Windows 95B (OSR 2)
■Windows Millennium Edition (Windows Me) and Windows 98/98SE
■Windows NT 4.0 Workstation/Server
■Windows 2000 Professional
Windows 95B (OSR 2)
Wireless Client
Upgrade Procedure Remove the old driver.
1Under Device Manager, select Network Adapters.
2Under Network Adapters, select the AirConnect card.
3Select Remove, then reboot the PC.
Install the new driver.
1Insert the Installation CD or 3.5" diskette into the PC.
2Follow the instructions displayed on the screen to load the new driver. If one or
more dialog boxes pop up indicating a version conflict, always answer "yes" to
keep your existing files.
3When prompted, enter the WLAN Service Area ID.
4Remove the Installation CD or 3.5" diskette, insert the Windows 95B or 95C
installation diskette into the floppy drive.
5Click OK when prompted. The PC will search for required operating system files on
the installation diskette. If one or more dialog boxes pop up indicating a version
conflict, always answer "yes" to keep your existing files.
Upgrade the 3Com Launcher.
1Remove the Windows 95B or 95C installation diskette, and reinsert the Installation
CD or 3.5" diskette.
2Go to Start > Run, enter <drive>:\setup.exe, and click OK.
3Select Installation for Windows.