23 CHAPTER 7: UPGRADE PROCEDURES
4Select Install WLAN Applications.
5Follow the instructions on the screen.
Upgrade the firmware.
1With the Installation CD or diskette still inserted into the PC, select Start >
Programs > 3Com AirConnect > AirConnect Firmware Upgrade Utility.
2Make sure that the AirConnect wireless PC Card is inserted in the PC.
3Click the button to the right of the field labeled Firmware Filename, then go to the
Firmware > MU directory on the Installation CD or diskette.
4In the Firmware\MU directory, select the upgrade file: 3compc.img
5Click Update to begin the upgrade.
6When prompted, reboot the system.
Windows Me, Windows 98, and Windows 98SE Wireless Client Upgrade Procedure Remove the old driver.
1Under Device Manager, select Network Adapters.
2Under Network Adapters, select the AirConnect card.
3Select Remove.
4When prompted, select Yes to reboot the PC.
Install the new driver.
1Insert the Installation CD or 3.5" diskette into the PC.
2Follow the instructions displayed on the screen.
3When prompted, enter the WLAN Service Area ID.
4Remove the Installation CD or 3.5" diskette, insert the Windows 98 installation
diskette into the PC.
5Click OK when prompted. The PC will search for required operating system files on
the installation diskette.
6When prompted, reboot the PC.
Upgrade the 3Com Launcher.
1Be sure that the Installation CD or 3.5" diskette is inserted in the PC.
2Go to Start > Run.
3Enter <drive>\setup.exe, then click OK.
4Select Installation for Windows.
5Select Install WLAN Applications.
6Follow the instructions on the screen.