SE7221BK1-E Technical Product Specification 39
Feature Options Help Text Description
Secondary IDE Slave N/A While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Selects submenu with additional
device details.
Third IDE Master N/A While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Selects submenu with additional
device details.
Third IDE Slave N/A While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Selects submenu with additional
device details.
Hard Disk Write
Protect Disabled
Enabled
Disable/Enable device write
protection. This will be effective
only if device is accessed
through BIOS.
Primarily used to prevent
unauthorized writes to hard
drives.
IDE Detect Time Out
(Sec) 0
5
10
15
20
25
30
35
Select the time out value for
detecting ATA/ATAPI device(s). Primarily used with older IDE
devices with longer spin up times.
ATA(PI) 80Pin Cable
Detection Host & Device
Host
Device
Select the mechanism for
detecting 80Pin ATA(PI) Cable.
Table 44. BIOS Setup, IDE Device Configuration Sub-menu Selections
Feature Options Help Text Description
Device N/A N/A Display detected device info
Vendor N/A N/A. Display IDE device vendor.
Size N/A N/A Display IDE DISK size.
LBA Mode N/A N/A Display LBA Mode
Block Mode N/A N/A Display Block Mode
PIO Mode N/A N/A Display PIO Mode
Async DMA N/A N/A Display Async DMA mode
Ultra DMA N/A N/A Display Ultra DMA mode.
S.M.A.R.T. N/A N/A Display S.M.A.R.T. support.
Type Not Installed
Auto
CDROM
ARMD
Select the type of device connected
to the system. The Auto setting should work in
most cases.
LBA/Large Mode Disabled
Auto Disabled: Disables LBA Mode.
Auto: Enabled LBA Mode if the
device supports it and the device is
not already formatted with LBA
Mode disabled.
The Auto setting should work in
most cases.