Intel manual Server Board Overview, SE7221BK1-E Feature Set

SE7221BK1-ETechnical Product Specification

2.Server Board Overview

2.1SE7221BK1-E Feature Set

The Intel® Server Board SE7221BK1-E supports the following feature set:

ƒProcessor and Front Side Bus (FSB) support

-Supports single Intel® Pentium® 4 and Celeron® processors in an LGA775 package

-Capable of 800 MT/s on system bus

-Supports Hyper-Threading Technology

-Supports Intel® Extended Memory System 64 Technology (EM64T)

ƒIntel® E7221 chipset components

-GMCH integrated graphics controller in GMCH component (Intel® GMA 900)

-ICH6R I/O controller

-PXH PCI-X Hub

-12-deep In-Order Queue

ƒMemory System

-4 DIMM sockets supporting 400/533MHz DDR2 DIMMs

-Data bandwidth per channel of 4.2GB/s or 8.5GB/s in dual channel when using DDR2 533MHz

-Support for up to two DDR2 channels for a total of 4 DIMMs (2 DIMMs /Channel) providing up to 4GB max memory capacity.

-Support for 256MB, 512MB, 1GB and 2GB DRAM sizes -Supports Performance Acceleration Technology (PAT)

ƒI/O Subsystem

Four independent PCI Buses:

ƒSegment A: One PCI 32-bit/33-MHz, 5 V connector supporting full length PCI add-in cards and one embedded device(Supports PCI Specification, Rev 2.3)

One Intel® 10/100/1000 82541PI gigabit Ethernet Controller

ƒSegment B: One PCI 32-bit/66-MHz embedded device (SE7221BK1LX sku only) One Intel® 10/100/1000 82541PI gigabit Ethernet Controller

ƒSegment C: Two PCI-X 64-bit/66-MHz, 3.3 V slots supporting full length / full height PCI / PCI-X add-in cards or one 3.3V PCI-X 64-bit/100-MHz slot with riser card (SE7221BK1LX sku only)

ƒSegment D: One x8 PCI Express* slot supporting x1/x2/x4/x8 PCI Express* add-in card or one x8 PCI Express* slot with riser card (SE7221BK1LX sku only)

ƒSerial ATA host controller

- Four independent SATA ports supports data transfer rates up to 1.5 Gb/s (150MB/s) per port

ƒIDE controller

- One IDE connector, supporting up to two ATA-100 compatible devices

2 Revision 1.3