SE7221BK1-ETechnical Product Specification

9.6.3.1Recovery Mode

Three conditions can cause the system to enter recovery mode. Pressing a hot-key, setting the recovery jumper, and damage to both partitions of the ROM image will cause the system to enter recovery and update System ROM without the boot-block.

BIOS Recovery

The recovery disk must include the BIOS image file AMIBOOT.ROM. The 2 MB AMIBOOT.ROM file may be used on a 2.88MB floppy media (to go with a 2.88 MB legacy or USB floppy device), a USB mass storage device (i.e. a USB disk on key, must be USB 1.1 or 2.0 compliant), a USB CDROM (USB 1.1 or 2.0 compliant), an ATAPI mass storage device, or an ATAPI CDROM or DVD.

The recovery mode procedure is as follows:

1)Insert the Recovery media with AMIBOOT.ROM into the system as appropriate based on whatever device is used.

2)Power on system, and when progress code E9 is displayed on port 80h,the system will detect the disk.(if there is no image file present, the system will cycle through progress code F1 to EF.)

3)When F3 is displayed on port 80h, the system will read the BIOS image file.

4)The screen will display flash progress and show if NVRAM and CMOS have been destroyed.

5)When recovery mode is complete, the system will halt and the system can be powered off.

NOTE: There are three different hot-keys that can be invoked: <Ctrl+Home> - Recovery with CMOS destroyed and NVRAM preserved. <Ctrl+PageDown> - Recovery with both CMOS and NVRAM preserved. <Ctrl+PageUp> - Recovery with both CMOS and NVRAM destroyed.

Multi-Disk Recovery

With this new feature the System Recovery can be made from Multiple Floppy Disks to support ROM image greater than 1MB.

Usage:

1)Use the SPLIT.EXE utility to split the ROM image. Execute the following command at the command prompt:

split <File Name To Be Split> <New File Name> <File Size in KB>

For Example:

C:\split AMIBOOT.ROM AMIBOOT 1024

2)The above command will create the files of sizes 1MB each (1024 KB) with names AMIBOOT.000, AMIBOOT.001... and so on, depending upon the AMIBOOT.ROM file size.

3)Load the first disk AMIBOOT.000

54

Revision 1.3

Page 66
Image 66
Intel SE7221BK1-E manual Recovery Mode, Bios Recovery, Multi-Disk Recovery, Usage, split AMIBOOT.ROM Amiboot