SE7221BK1-E Technical Product Specification

Revision 1.3

40

Feature Options Help Text Description
Block (Multi-Sector
Transfer) Disabled
Auto Disabled: The Data transfer from
and to the device occurs one sector
at a time.
Auto: The data transfer from and to
the device occurs multiple sectors at
a time if the device supports it.
The Auto setting should work in
most cases.
PIO Mode Auto
0
1
2
3
4
Select PIO Mode. The Auto setting should work in
most cases.
DMA Mode Auto
SWDMA0-2
MWDMA0-2
UWDMA0-5
Selcet DMA Mode.
Auto :Auto detected
SWDMA :SinglewordDMAn
MWDMA :MultiwordDMAn
UWDMA :UltraDMAn
The Auto setting should work in
most cases.
S.M.A.R.T. Au to
Disabled
Enabled
S.M.A.R.T. stands for Self-
Monitoring, Analysis and Reporting
Technology.
The Auto setting should work in
most cases.
32Bit Data Transfer Disabled
Enabled Enable/Disable 32-bit Data Transfer
9.5.2.3 Floppy configuration sub-menu

Table 45. BIOS Setup, Floppy Configuration Sub-menu Selections

Feature Options Help Text Description
Floppy A Disabled
1.44 MB 3 1/2"
Select the type of floppy drive
connected to the system. Note: Intel no longer

validates 720 Kb &

2.88 Mb drives.
Onboard Floppy Controller Disabled
Enabled Allows BIOS to Enable or
Disable Floppy Controller.
9.5.2.4 Super I/O configuration sub-menu

Table 46. BIOS Setup, Super I/O Configuration Sub-menu

Feature Options Help Text Description
Serial Port1 Address Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Allows BIOS to Select Serial Port1
Base Addresses. Option that is used by other serial port
is hidden to prevent conflicting
settings.