Ricoh AP2610N setup guide Then type the IP address or host name

Windows 2000 Configuration

E Select the printer.

	TCP/IP
	A Click the printer you want to use, and then click [OK].
	Note
	❒ Printers that respond to an IP broadcast from the computer will be dis-
2
	played. To print to a printer not listed here, click [Specify Address] and

then type the IP address or host name.

NetBEUI

AClick [NetBEUI].

A list of printers that can be printed by the NetBEUI protocol appears.

BClick the printer you want to use, and then click [OK].

Note

❒Printers that respond to a broadcast from the computer will be dis- played. To print to a printer not listed here, click [Specify Address] and then type the NetBEUI address. Make sure that the NetBEUI address is on the configuration page. For information about the printing of the configuration page, see "Printing a Configuration Page" in the Setup Guide. The NetBEUI address appears as "\\RNPxxxx\xxx" on the con- figuration page. Type the printer's network path name in the form of "%%Computer name\Share name". Do not type "\\" as head characters but "%%".

❒You cannot print to printers beyond routers.

IPP

AClick [IPP].

The IPP setting dialog box appears.

BTo specify the IP address of the printer, type "http://printer's-ip-ad- dress/printer" or "ipp://printer's-ip-address/printer" in the [Printer URL] field.

(Example IP address is 192.168.15.16) http://192.168.15.16/printer ipp://192.168.15.16/printer

CAs necessary, type the names to distinguish the printer in [IPP Port Name]. Type a name different from those of any existing port names.

If you omit this, the address entered in [Printer URL] will be set as the IPP port name.

20