Ricoh AP2610N setup guide Create a print queue as follows, For type, select Remote Other/Unknown

NetWare Configuration

L Create a print queue as follows:

Note

❒If you use a currently defined print queue, go to step M.

AFrom the [Available Options] menu, select [Print Queue Information], and then press the {ENTER} key.

BPress the {INSERT} key, and then type a print queue name.

CPress the {ESC} key to return to the [Available Options] menu.

M Create a printer as follows:

A From the [Available Options] menu, select [Print Server Information] , and then press the {ENTER} key.

B To create a new print server, press the {INSERT} key, and then type a print server name.

5

If you use a currently defined print server, select one of the print servers shown in the [Print Server] list.

Important

❒Use the same name as that specified in the NIB Setup Tool. (Step H).

CFrom the [Print Server Information] menu, select [Print Server Configuration].

DFrom the [Print Server Configuration] menu, select [Printer Configuration].

ESelect the printer which is indicated as “Not Installed”.

FIf you want to change the name of the printer, type a new name.

A name “Printer x” is assigned to the printer. “x” stands for the number of the selected printer.

GFor type, select [Remote Other/Unknown].

The IRQ, Buffer size, Starting form, and Queue service mode are automat- ically configured.

HPress the {ESC} key, and then click [Yes] in the confirmation dialog box.

IPress the {ESC} key to return to the [Print Server Configuration] menu.

N Assign print queues to the created printer as follows:

AFrom the [Print Server Configuration] menu, select [Queues Serviced By Printer].

BSelect the printer created in step M.

CPress the {INSERT} key to select a queue serviced by the printer.

Note

❒ You can select more than one queue at a time.

DFollow the instructions on the screen to make other necessary settings.

When you have finished the previous steps, make sure that the queues are assigned.

56