Ricoh AP2610N setup guide Using Pure IP in the NetWare 5/5.1 environment, Click TCP/IP protocol

NetWare 4.x, 5/5.1 - Advanced Settings

N Assign print queues to the created printer as follows:

AClick [Assignments], and then click [Add] in the [Assignments] group.

BIn the [Available objects] box, click the queue created in step L, and then click [OK].

CClick [Configuration], and in the [Printer type] box, select [Parallel] using the drop-down menu, and then click [Communication].

DClick [Manual load] in the [Communication type] group, and then click [OK].

EAfter checking the settings, click [OK].

O Create a print server as follows:

A Select the context specified using the NIB Setup Tool (step I-A), and on the [Object] menu, click [Create].

B In the [Class of new object] box, click “Print Server”, and then click [OK].

When you are using NetWare 5/5.1, click “Print Server (Non NDPS)”.

C In the [Print Server name] box, type the name of the print server.

Important

5

❒Use the same name as that specified using the NIB Setup Tool. (Step H)

DSelect the [Define additional properties] check box, and then click [Create].

P Assign the printer to the created print server as follows.

AClick [Assignments], and then click [Add] in the [Assignments] group.

BIn the [Available objects] box, click the printer created in step M, and then click [OK].

CAfter checking the settings, click [OK].

Note

❒If the printer works as configured, the name of the print server appears as an attached user.

Using Pure IP in the NetWare 5/5.1 environment

A Log on to the file server as an Admin or an Admin equivalent. B Run the NIB Setup Tool.

Reference

See p.50 “Running the NIB Setup Tool” .

C Click [Property Sheet] and click [OK].

The [Network board list] dialog box appears.

D Click [TCP/IP protocol].

63