Ricoh AP2610N setup guide Select Sample Print in Print Job

Setting up Options

Windows 2000/Windows XP, Windows NT 4.0

A From an application, select the menu command to print.

The print dialog box appears. 1

B Open the Printer Properties to set the Sample Print.

C Click to select the [Job/ Log] tab.

D Select [Sample Print] in [Print Job].

E Enter the "User ID" in [User ID]. This can consist of up to eight alphanumeric (a- z, A- Z, 0- 9) characters.

Note

❒Select this to identify the user associated with the job.

F Click [OK] to close the Printer Properties.

G Start printing from the application's print dialog box.

The Sample Print job is sent to the machine and one set is printed.

H Check the sample print to confirm that the settings are correct.

If the settings are correct, see "Printing a Sample Print File" in the Printer Ref- erence.

If not, you can delete the saved job. See "Deleting a Sample Print File" in the Printer Reference.

Macintosh

A From an application, select the menu command to print.

The print dialog box appears.

B Click to select [Job Log] from the pop up menu.

C Select [Sample Print] in [Job Type], and then select the appropriate setting.

D Enter the “User ID” in [User ID]. This can consist of up to eight alphanumer- ic (a-z, A-Z, 0-9) characters.

Note

❒This is used to identify the user associated with a job.

❒The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char- acters.

E After making all of the settings you want, click [Print].

The Sample Print job is sent to the machine and one set is printed.

3