Removing Misfed Paper

C Open the front cover by pushing the front cover release button, and then close it to reset the mis- feed condition.

ZGDY300J

Note

You can apply this procedure for both the paper tray and the optional Paper Feed Unit.

To reset the misfeed condition, open and close the front cover, then the indicator will be off.

When "Remove Misfeed

Internal Path/Open Front

Cover" Appears

Important

Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer. This might cause a misfeed and damage the printer.

A Open the front cover by pushing the front cover release button.

ZCEH120J

B While lifting the front side of the toner cartridge, pull it out of the printer.

Important

Be sure to put the toner car- tridge on a stable, flat surface.

Do not hold the toner cartridge upside down or stand it verti- cally.

5

ZGDT110J

C Pull out the misfed paper by holding both sides of paper. Be careful not to get toner dust on your hands or clothes.

ZGDY520J

83

Page 185
Image 185
Ricoh AP2610N setup guide When Remove Misfeed Internal Path/Open Front Cover Appears