Ricoh AP2610N setup guide Windows, Click the Printer Settings tab, Click the PostScript tab

Setting Up a Client Computer

J Click [OK] to close the Printer Properties, and again, open it.

K Click the [Printer Settings] tab.

L Select to clear the [Form feed] and [Enable banner] check boxes.

Note

❒You should not select these boxes because they should be specified using the printer driver. If they are selected, the printer might not print correctly.

When using the PostScript printer driver

Follow these steps to set up for the PostScript printer driver.

AClick the [PostScript] tab.

BClick [Advanced].

CClick to clear the [Send CTRL+D before job] and [Send CTRL+D after job] check

boxes.
	5
M Click [OK] to close the Printer Properties.

Windows 2000

Follow the procedure to set up a Windows 2000 client.

Preparation

Log on to the NetWare file server before starting the following procedure.

A Double-click the [My Network Places] icon on the desktop and navigate to the queue you want to use, and then double-click it.

The printers dialog box appears.

B Click [No].

C Close all the applications that are currently running.

D Insert the CD-ROM labeled “Printer Drivers and Utilities” into the CD- ROM drive.

If the setup menu starts automatically, you can go to the next step. If not, see the Setup Guide.

E The [Printer Installation] dialog box appears.

F From the [Port] list, select the queue you selected in step A, and then click [Next >].

G Follow the instructions on the screen to complete the installation of the printer driver.

69